Monthly Archives: March 2018

How to look after your crystal chandelier

Many owners of crystal chandeliers avoid the job of cleaning their prized possession because the thought of taking each crystal down and washing them individually is an arduous task. Here we take a look at the different cleaning options.

Image Credit

In essence, whether you own several antique crystal chandeliers or an inexpensive modern one, the key is to clean little and often with a feather duster. That way, dust particles won’t dull the crystal drops.

How often should you clean your crystal chandelier?

Check when your crystal chandelier was made. Those that were made within the last ten years need less cleaning because they have a coating on them that helps to repel dust. As soon as it starts to lose its sparkle and shine, you will know it is time for a clean.

The drip-dry approach made easy

Use a crystal cleaner or glass cleaner and take the following steps :
•       Switch off the ceiling light.
•       Remove the lamps and plug the sockets so liquid can’t get into the connections.
•       Place a covering on the floor to soak up any excess water.
•       Use a generous amount of spray all over the chandelier and allow it to fall off naturally; this will take the dust with it.
•       Use a dust mask and make sure the room is well ventilated.
•       Allow the light fitting to dry out completely before putting the lamps back in place.
•       Wipe the bulbs and switch on. Your chandelier, like the ones at, will be sparkling again!

Image Credit

The glove method

  •      Wear white cotton gloves and use chandelier or glass cleaner. Again, make sure the electricity is switched off.
    •       Use a step ladder and position it under the light fitting. Place your fingertips in the solution and run along each crystal strand.

    The complete removal

In some cases, the only way to clean a chandelier is to wash each drop by hand. It’s worth taking a photograph of the chandelier so each one is put back in the right place. You can even watch a video.

Remove each one and clean in warm soapy water before rinsing in cold water. Dab each one dry and replace. The process will be worth it!
Finally, remember to dust every week and undertake an annual thorough cleaning. Then sit back, relax and enjoy!

Why silicone is the first choice for many applications

Silicone is a great choice of material for many different purposes. The reason for this is that it has many useful properties that make it ideal for use in many industries.

Image Credit

Temperature resistant

Silicone has a high temperature resistance, which means it can withstand being used in very hot and very cold environments. It retains its elasticity in extreme temperatures and does not go brittle when freezing or become damaged in the heat. Silicone is therefore ideal for applications in which protecting against temperature damage is useful, such as in house paint.

Fire resistant

Silicone is also highly resistant to flames, making it stable and unlikely to catch fire. Electronic applications are therefore ideal places to use silicone, especially where the item needs to self-extinguish quickly such as in computers and ovens.

Silicone hoses from suppliers such as can be useful in industry. An example is the automotive industry, where high temperatures are found and stable hoses are needed.

Image Credit

Hard wearing

Silicone is highly durable, which is one of the reasons it is used in medicine. Silicone is used for implants because it is strong and resists wear, is accepted by the body and is permeable, which means some substances can pass through it. Silicone can also be used to protect a wound while it heals, acting as a useful seal.

Sealing properties

As silicone is good as a seal, it is used not only in medicine but also in construction. Silicone seals can be used in cockpits of planes and in doors of cars and houses to keep draughts out. Seals are also useful to protect the corners of a bath.

One problem with using silicone sealant around a bath in this way is that it can become mouldy due to the damp, which encourages fungal spores. If you need to remove the sealant, it is best to cut off the majority with a blade then use a pan scourer to remove the remainder. You can also put new silicone sealant on top of old sealant, as they will bond together.

The strong properties of silicone make it the first choice for many applications. From sealant to medical implants and ovens to computers, you will find silicone everywhere thanks to its temperature resistance, durability, stability and safety.

Looking After Your Boiler

Boiler breakdowns always seem to occur at the worst possible time when the winter weather is upon us. That’s normally because they have been sitting idle all summer and are then suddenly required to work flat out when autumn and winter descend. Boiler problems can be both inconvenient and expensive, but there are things you can do to look after this important investment. Prevention can save you a lot of money and hassle, so what should homeowners be doing to prepare for the colder months:

Regular Servicing

One of the best ways to keep your boiler in tip top condition is to have it serviced regularly and the recommendation is for an annual service to avoid the disruption of a breakdown. A gas safety engineer can come and do this for you to give you peace of mind that your boiler is in good working order. For Boiler Installation Gloucester, visit

Pipe Insulation

By insulating your pipes, you’ll stop them from freezing up when the temperature drops below zero. This helps to prevent the boiler’s condensate pipes from seizing up during the winter months which is major cause of boiler breakdown. Insulation for pipes is fairly cheap and can be purchased in local DIY shops.

Image credit


Taking care of your central heating

By taking care of your central heating system as a whole is a great way to reduce the chances of suffering from a boiler breakdown.

Bleeding your radiators is a simple job that can help remove excess air trapped inside them. If you’ve noticed that some of your radiators are warmer at the top than the bottom, then air is trapped in the system. You’ll need to release that air as it’s a sign your system isn’t working as efficiently as it should be and costing you extra in wasted energy.

Bleeding a radiator is a straightforward job. Make sure the heating is turned off before putting the radiator key into the slot on the valve. Twist the key anticlockwise about 45 degrees and you should hear the sound of air hissing. Have a rag or old towel to hand to catch any water that drips. Lock the valve back up and the job should be done.

Image credit


Put the heating on

A boiler that sits idle for months could be prone to seizing, so it’s always a good idea to turn your heating on occasionally just to keep the system active. During the summer, it is recommended that you run the heating occasionally for about 15 minutes.

Boiler pressure

Over time, a boiler can lose some pressure which results in them running less efficiently. Take a look at the pressure gauge on your boiler to see if it might need topping up. You will probably need to refer to the manual or contact a boiler specialist.



Have you ever thought about how to get more revenues and attract more clients to your heating and air conditioning business? If yes, I’ll try to educate you on how to use a pricing system – flat rate – which appeared in the HVAC industry in 1990.

In this article, I’ll be showing you reasons why professionals are succeeding in getting more clients and have their revenue boosted. Contractors are dumping the old, popular time and material pricing system, which brings nothing but long duration of arguments and leaving your clients unsatisfied.


What are time and material pricing?

This method of pricing considers only the time spent in getting the job done, which also has the cost of parts included. The downside to this is that customers are only aware of the accumulated price after the job is completed.

You check example of flat rate pricing models here –

Flat rate pricing

This is quite different as the price is given upfront. The prices are based on an estimated time to be spent in getting the job done completely. So, this enables customers to be aware of the charges and can make the right decisions.



Using the flat rate model you can have your client know of the charges for each service you will be rendering. This makes it perfect for people who like to be in control of their budget and business owners inclusive.

This pricing model eliminates unnecessarily worried that might arise in the minds of your customers because you are spending more hours and will have to pay a lot due to your hourly rates. It aids your service by allowing your customers to agree on upfront – if the price seems fair and affordable before you commence.

Hence, your clients can now find it very easy to save up for furnaces, air conditioning system, and much other equipment.


Another great factor why contractors make use of this pricing system is because it’s a fast way to get the job done. Heating and air conditioning customers sometimes want an expeditious service. so, you don’t need to waste time like when you using time and material pricing system. you can just get right to the job and get started immediately.


Most customers always have the feeling like you are overcharging them. They believe you are doing that by working slowly for more labor time so you get more revenue or perhaps using expensive parts for your gain.

All these are eliminated using flat rate pricing system. It removes the annoying billing surprises, which most clients get the job is completed. This always results in lots of criticism and complaints. Now, you can get your customers focused on your job well done, instead of how pricey your work is.
And do not forget a happy, relaxed customer is a very good client, which will promote your good works to friends, family and drop a good positive review on your webpage.

Get More Clients

If your business, heating and air conditioning, use flat rate pricing, then you can take advantage of the pricing system to advertise particular fees for some common services. This is very effective, as a client who pays has been regularly overcharged for such service can come running to you.

Do you want to get started with the new pricing system, visit coolfront

Improve your skills

Now, irrespective of how long you spend you can’t add a dime to flat rate you have given to your customers. This allows you to get jobs done faster, which helps increases your skills to get the job done. You don’t have to spend long hours or get your focus away from the job because you thinking how to earn more by spending extra hours.
Moreover, most technicians now look for a way to get jobs which they spend hours completing reduced to minutes, so they can finally earn more.


Do you know the fixed price as the capability to change your heating and air conditioning business for good? Many companies – plumbing, electrical and moving companies are now using them to make their customers feel they are treated justly.

In addition, this has been the reason why postal services now have more customers than before. The introduction of boxes that allows customers ship to any state they desire at the same price without a dime added.

So, why not incorporate the same fixed pricing to your heating and air conditioning business and that seeing how well your business will be.